·Good elasticity

·Thin thickness

·Tacky backing for tiny pattern

With 100% TPU elastic material, the soft feel, can be stretched, matte surface effect. 60-70um thick, high temperature resistant PET release film, with a sticky function. The high temperature hot stamping is not deformed, not degumming. It's more suitable for personal clothing.

There are 24 colors available.

Here are some details about the thin elastic heat transfer vinyl as below:

1. 100% PU matertial

2. Soft feeling, good stretched

3. 24 colors available

4. Matte finish

5. Good washing assistance: 40-50 washing times, 30 minutes/time

6. Easy to cut and weed

7. Thickness: 60-70um

8. Tacky carrier film, avoiding designs falling off while weeding

It is suitable for underwear, swimwear, lycra fabric etc.

How to transfer the thin elastic heat transfer flex film?

1. Cut your design in mirror image on the dull side (that does not show the final color)

2. Weed the excess material from the design.

3. Pre-heat your iron and fabric (No STEAM)

4. Place the design on your fabric (final color side up)

5. Press down iron with firm pressure for 150 - 160 degrees Celsius with 10-12

seconds.

7. Peel off the clear film on its surface. (cold peel)